Prestressed concrete foundation pile manufactured for structural and infrastructure applications.
Choose the section that suits the design requirement. Detailed technical information for each section is provided below.
Standard dimensions and structural reference values for the current square pile range.
| DIMENSI PILE mm | PANJANG PILE m | LUAS PENAMPANG mm² | BERAT kg/m | MOMEN RETAK ton-m | BEBAN AKSIAL ton |
|---|---|---|---|---|---|
| 200 x 200 - N | 6-12 | 40,000 | 97.5 | 1.2 | 51 |
| 200 x 200 - S | |||||
| 200 x 200 - D | |||||
| 250 x 250 - N | 6-12 | 62,500 | 152 | 1.8 | 80 |
| 250 x 250 - S | |||||
| 250 x 250 - D | |||||
| 300 x 300 - N | 6-12 | 90,000 | 217.5 | 2.8 | 119 |
| 300 x 300 - S | |||||
| 300 x 300 - D |
N / S / D designations follow the product type coding in the supplied specification sheet. Final publication values should be checked against approved production drawings and project design requirements.
The verified cross-section and longitudinal reinforcement drawings for each pile size, including PC wire arrangement, spiral reinforcement, cover, joint plate, pile shoe and lifting information will be shared upon request.
01 Reinforcement & prestressing — PC wire arrangement, reinforcement installation and controlled stressing.
02 Casting & compaction — concrete placed in prepared moulds under controlled production.
03 Curing & release — strength verified before prestress release and handling.
04 Inspection — dimensions, straightness, surface condition, joint and identification checked before dispatch.
Square piles can be integrated with hydraulic static piling where site and design conditions permit. Final lifting, jointing and installation criteria will follow project requirements and approved product drawings.
Technical data sheets, approved drawings and project-specific requirements can be provided with the product enquiry.